Panasonic TH-58PH10UK - Table of Contents; Fixing Bands; Location of Lead Wiring

1 Applicable signals 4
2 Safety Precautions
5
2.1. General Guidelines
5
3 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
6
4 About lead free solder (PbF)
7
5 Service Hint
8
6 Disassembly
9
6.1. Removal of Rear Cover
9
6.2. Removal of HU-Board
9
6.3. Removal of HA-Board
9
6.4. Removal of Slot Block
9
6.5. Removal of DS-Board
10
6.6. Removal of HX-Board
10
6.7. Removal of DN-Board
10
6.8. Removal of P-Board
11
6.9. Removal of D-Board
11
6.10. Removal of H3-Board (L, R)
11
6.11. Removal of SU-Board and SD-Board
11
6.12. Removal of SC-Board
12
6.13. Removal of SS2-Board and SS3-Board
12
6.14. Removal of SS-Board
12
6.15. Removal of C1, C2 and C3-Board
12
6.16. Removal of S1-Board
13
6.17. Removal of Fan
14
6.18. Removal of V1-Board, V2-Board and Operation Button
14
6.19. Removal of Escutcheon and Front Glass
15
6.20. Removal of Plasma Panel
16
7 Location of Lead Wiring
19
7.1. Location of Lead Wiring (1)
19
7.2. Location of Lead Wiring (2)
20
8 Adjustment Procedure
21
8.1. Driver Set-up
21
8.2. Initialization Pulse Adjust
22
8.3. P.C.B. (Printed Circuit Board) exchange
22
8.4. Adjustment Volume Location
23
8.5. Test Point Location
23
9 Service mode
24
9.1. CAT (computer Aided Test) mode
24
9.2. IIC mode structure (following items value is sample data.)
27
10 Adjustment
28
10.1. RGB white balance adjustment
28
10.2. HD white balance adjustment
30
10.3. Power control adjustment
32
11 Trouble shooting guide
33
11.1. Self Check
33
11.2. No Power
35
11.3. No Picture
35
11.4. Local screen failure
36
12 Option Setting
37
13 Conductor Views
39
13.1. P-Board
39
13.2. HA-Board
45
13.3. HU-Board
46
13.4. HX-Board
47
13.5. H3, S1, V1 and V2-Board
48
13.6. DS-Board
49
R
/
P
R
/
C
R
:0.7 Vp-p (75-ohm)
HD
/
VD:1.0 - 5.0 Vp-p (high impedance)
A
UDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6Ω) 16 W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Cont
r
ol Transmitter EUR7636070R
Batteries 2 × AA Size
Fixing bands TMME203 × 2
Dimensions (W × H × D) 55.1” (1,399 mm) × 33.2” (843 mm) × 3.9” (99 mm)
Mass (weight)
main unit onl
y
approx. 119 lbs
with spea
k
ers approx. 130.1 lbs
Note:
· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
CONTENTS
Page Page
2
TH-58PH10UK