Pairing
Perform the registration when Touch Pad Controller is used for the first time.
The registration starts automatically when you press any buttons (except
Standby On / Off switch) after installing batteries.
To register again, take following steps.
1. Display the menu with MENU.
2. Select Setup > VIERA Touch Pad Controller > Pairing and press OK to
access.
3. Follow the on-screen instructions.
= Note =
●
Place Touch Pad Controller within 50 cm from the TV while registration is
in progress.
●
Only 1 Touch Pad Controller can be registered.
- 235 -
To Next Page
Loading...
