Settings
Setting menu
How to use
Various menus allow you to make settings for the picture, sound, and other
functions.
1. Display the menu with MENU.
●
Displayed items vary depending on the input signal.
2. Select the menu and press OK to access.
3. Select the items and press OK to access.
●
Only available items can be selected.
●
You can also access from eHELP pressing (red) at each item (if
available).
●
You can select from among alternatives with / and press OK to set.
●
You can adjust using the slide bar with / and press OK to set.
●
You can go to the next screen with OK.
●
You can enter names or numbers freely for some items.
1) Enter characters one by one with Cursor buttons and press OK to set.
– You can set characters using Numeric buttons.
Functions > Setting characters > Using Numeric buttons
2) Press BACK/RETURN to store.
●
To reset the settings
– To initialise picture or sound settings only, select Reset to Defaults in
the Picture Menu or Sound Menu.
– To initialise all settings, select Shipping Condition.
Functions > Shipping Condition
- 277 -
To Next Page
Loading...
