Preparations
●
Connect the equipment supporting VIERA Link.
●
For details of VIERA Link connections
Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link
●
Use a fully wired HDMI compliant cable.
●
Set up the connected equipment. Read the manual of the equipment.
●
Set VIERA Link to On in the Setup Menu.
●
Set up the TV. After connection, turn the equipment on and then switch the
TV on. Select the HDMI input from Input Selection with AV and make sure
that an image is displayed correctly. (This setup should be done each time
the following conditions occur.)
– First time operation
– Adding or reconnecting equipment
– Changing setup
- 251 -
To Next Page
Loading...
