Indicates which doorphone is calling while talking or
monitoring.
Example:
Doorphone 2
Indicates that the door is opened when the Electric
lock (sold separately) is connected to the main
monitor. (page 20)
Indicates that the "Press-to-talk" mode is on.
(page 16)
Indicates the voice changer mode is on. (page 22)
Indicates the level of the reception.
Use within this range.
Strong
W
eak
R When
the sub monitor is out of range of the main
monitor,
flashes and “OUT OF RANGE” is
displayed. (Move closer to the main monitor.)
Indicates the registration number of the sub monitor.
Indicates that the ringer volume for the doorphone is
set to "OFF".
Indicates the operation of the navigation key.
(The display varies depending on the operation.)
Example: menu setting
Press{f}
(BACK).
Press{D}(OK).
3.3 Charging the sub monitor
Only connect the charger with the supplied Panasonic
AC adaptor (page 3
).
1 Insert the battery.
Remove the battery cover, align the terminals and
insert.
Close the battery cover.
R The battery level is displayed as
.
2 Assemble the charger stand.
n To assemble the charger stand
Plug the connector of the AC adaptor into the jack
on the charger.
R You can pull out the AC adaptor cord to the
left or right side.
Attach the charger stand.
n To remove the charger stand
Pressing the tab, pull the charger stand to detach.
13
3. Preparation
To Next Page
Loading...
