Sub-menu
Settings
1 2 3 4
Cancel
Sub monitor
*1
/
Extension
monitor,
Repeater
*1
– – –
*1 These functions are not available for the extension monitor.
Item name: “Other”
Sub-menu
Settings
1 2
Play lamp
– <Enable>, Disable
Delete all images
Delete all images/Delete
Non-protected images
Yes, No
Initialize settings
Default setting
*1
/Factory
setting
*3
– Select “Factory setting”
when disposing, transferring, or
returning the product.
Yes, No
Demo mode
*2
,
*3
– On, <Off>
*1 The following settings are not initialized.
– “Power supply frequency”, “Select language”, and “Electric lock” settings.
– Registration
information of devices registered to the main monitor. (All devices remain registered to the main
monitor even after initialization.)
*2 These functions are not available for the extension monitor.
*3 These functions are not available for Apartment mode.
Item name: “Operating instructions”
Sub-menu
Settings
1
Operating instructions
Displays the Web site for downloading the Operating Instructions.
8.5 Sub monitor - function settings list
You can change the settings to match how the sub monitor is used.
1 Press M N.
2 Select the desired item ® (OK).
R In some functions, repeat this operation according to the display instructions.
3 Select the desired setting ®
(OK).
4 Press M
N.
Note:
R If
you do not perform any operations for 90 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
25
8. Additional functions
To Next Page
Loading...
