8.3 Ringtone settings
You can change the ringtone type and volume that is heard during an incoming call.
–
For information about how to configure settings, see page 23 for the main monitor/extension monitor and
page 26 for the sub monitor.
8.4 Main monitor/extension monitor - function settings list
You can change the settings to match how the main monitor or extension monitor is used.
1 Press M N.
2 Select the desired item ® .
R Repeat this step as necessary to navigate to the desired setting.
3 Select the desired setting ® .
4 Press M N.
Note:
R If
you do not perform any operations for 90 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
R While changing settings, “U” is displayed to the left of the currently selected item.
Item name: “Initial settings”
Sub-menu
Settings
1 2 3
Time and date
settings
*2
– – 2017-1-1 0:00
Zoom position
settings
*1
,
*3
Doorphone 1
- 2
– –
For details see
page 22.
Wide/Zoom
settings
*1
,
*3
Doorphone 1
- 2
When
visitors
come/When
monitoring
Zoom, <Wide>
Power supply
frequency
*1
– – <50 Hz>, 60 Hz
–
To prevent mottled or uneven colour from
being displayed, choose the appropriate
power supply frequency for your area.
Select language
*2
– – <English>, ةيبرعلا
*1 These functions are not available for the extension monitor.
*2
When using the product for the first time, follow the on-screen instructions to configure this setting (page 14).
*3 These functions are not available for the supplied doorphone (VL-V522L). You can use these functions with
optional doorphones (page 4).
Item name: “Ringtone”
Sub-menu
Settings
1 2
Ring volume Doorphone
Extra loud, <Loud>, Normal, Quiet, Mute
Page
Extra loud, <Loud>, Normal, Quiet
Ringtone Doorphone 1
<Sound 1>, Sound 2, Sound 3 <Normal>, Repeat
Doorphone 2
Sound 1, <Sound 2>, Sound 3 <Normal>, Repeat
23
8. Additional functions
To Next Page
Loading...
