4.3 Monitoring the outside with
the doorphone
You can monitor the sounds and images from the
doorphone using the main monitor, extension monitor,
and sub monitor.
1 Press M N. (M N for the sub monitor.)
R If there are multiple doorphones, select the
desired
doorphone ®
. ( (OK)
for the
sub monitor.)
R The images from the doorphone are displayed.
2 Monitor the sound and image.
R You can talk to the monitored party by pressing
M
N.
3 When finished, press M N.
Note:
R The sound from your end will not be heard at the
doorphone.
R You can monitor for up to about 3 minutes.
Features available while monitoring
–
Recording doorphone images (page 18)
– Adjusting wide/zoom and pan/tilt settings
(page 22)
*1
– Turn on or off the operation guide (page 22)
– Adjusting sound and display settings (page 22)
– Scrolling an image right or left on the sub monitor
(page 22)
*1 These functions are not available for the supplied
doorphone (VL-V522L). You can use these
functions with optional doorphones (page 4).
4.4 Talking with other devices
You
can make intercom calls between the main monitor,
sub monitor, and extension monitor.
To make a call
1. Press M N. (M N for the sub monitor.)
2. If
there are multiple devices, select the device to page
®
. ( (OK) for the sub monitor.)
R To page all devices, select “Call all
together” ® . (“ALL” ® (OK) for
the sub monitor.)
3. Page the other party.
4. Talk
with the paged party when they answer the call.
5. When finished, press M
N.
To receive a call
1. When
the intercom call is received, press M
N to
talk to the paging party.
2. When finished, press M
N.
Note:
R Paging automatically ends after about 30 seconds
and intercom calls automatically end after about 90
seconds.
R When using the sub monitor to make or receive
intercom calls, extension monitors are displayed as
sub monitors in the list of available devices and for
the device name of incoming calls. For example,
“Extension monitor
1” is displayed as “SUB
1”.
17
4. Talking and monitoring
To Next Page
Loading...
