To Next PageTo Next Page
Need help?Do you have a question about the Panasonic VL-V591 and is the answer not in the manual?
General| Type | Video Intercom System |
|---|---|
| Camera | Yes |
| Connectivity | Wired |
| Camera Sensor | CMOS |
| Audio Type | Hands-free |
| Operating Temperature | -10°C to +50°C |
| Audio | Yes |
| Power Supply | From Monitor Station |
| Minimum illumination | 1 lx (within 50 cm) |
| Waterproof | IP54 |
| Resolution (TV Lines) | 420 TV Lines |
| Night Vision | Yes |
| Power Supply (DC) | 12V DC |
| Viewing angle | Approx. 87° horizontal, 66° vertical |
Describes the lobby station's connectivity to main monitor and door stations.
Lists all physical components supplied with the lobby station.
Critical warnings to prevent injury, death, and property loss during use.
Guidance on safe installation practices and avoiding hazards.
Rules for safe operation and servicing to prevent electric shock and damage.
Details on secure installation and avoiding specific environmental factors.
General safety precautions to reduce risk of fire, shock, or injury.
Tips for optimal system operation and environmental considerations.
Notes on responsibility, disposal, and customer communication.
Identifies and explains the function of all physical buttons and indicators on the unit.
Specifies locations to avoid for proper function and safety.
Details dimensions and angles for mounting the main unit on walls or pedestals.
Step-by-step guide for mounting and connecting the power supply unit.
Instructions for preparing the wall and mounting the flush mounted box.
Steps to separate cabinets and mount the main unit onto the flush mounted box.
How to use the camera angle control lever for optimal viewing.
Detailed instructions for connecting internal wiring, monitor stations, and door openers.
How to adjust audio volume and camera backlight settings.
Visual guide for connecting lobby station to main monitor stations and door openers.
Configuration steps for the main monitor stations, including 'LOBBY CONNECTION'.
Specifies cable types, distances, and loop resistance for connections.
Overview of entering programming mode and function codes for configuration.
Step-by-step guide to assign room numbers to terminal numbers.
How to check registered room numbers and terminal assignments.
Procedures for removing single or all room number registrations.
Instructions for setting or changing the PIN for door access.
How to configure the duration the door remains open after PIN entry.
Steps to initiate a call to a specific room from the lobby unit.
How to remotely open the door via a connected main monitor station.
Procedure for unlocking the common entrance door using the keypad PIN.
Guidance on how to clean the unit safely and effectively.
Technical details including power, dimensions, weight, and operating environment.
Information on symbols, disposal, and compliance for different regions.
