Installation method Wall mount or attach to DIN rail
External material ABS (flame retardant ABS resin)
Connectivity To control box
Number of connectable stations: 1
Wire: 1 pair PE insulation, thickness of one conductor is from 0.65
– 1.2 mm
Distance: up to 200 m (in case of 1.2 mm thickness)
To lift
Number of outputs to lift: 20
To lift controller
Number of outputs to lift controller: 1
Extension Box (VL-V703)
Power source Power supply unit (VL-PS240: 220 – 240 V AC, 0.2 A, 50 / 60 Hz)
24 V DC, 0.1 A
Power consumption Standby: Approx. 1.5 W
Operating: Approx. 1.5 W
Dimensions (mm)
(height ´ width ´ depth)
Approx. 210 ´ 108.5 ´ 52.5 (excluding protruding sections)
Mass (weight) Approx. 350 g
Operating environment Ambient temperature: approx. -10 °C to +50 °C
Ambient temperature for power supply unit: approx. 0
°C to +50 °C
Relative humidity: up to 90% (non-condensing)
Indoor installation only
Installation method Wall mount or attach to DIN rail
External material ABS (flame retardant ABS resin)
Connectivity To lobby stations
Number of connectable stations: 6
Wire: 1 pair PE insulation, thickness of one conductor is from 0.65
– 1.2 mm
To control box
Number of connectable stations: 1
Wire: 1 pair PE insulation, thickness of one conductor is from 0.65 – 1.2 mm
Note:
R When an extension box is connected, the maximum wire length from the lobby
station to the control box does not change.
18
3. Preparation
To Next Page
Loading...
