5.4 Telephone programming
Use this procedure to configure the following settings.
–
The extension numbers of the PBX that will be used as terminals 1–4 and the emergency terminal
– The names assigned to terminals 1–4
– Whether terminals 1–4 are used as a reception terminal or not
– Whether the emergency terminal can talk to the main monitor caller during an emergency call
1 Dial the extension number assigned to the control box.
2 Enter a feature number to specify which terminal you will assign.
Feature number Description
##*0# Emergency terminal
##*1# Terminal 1
##*2# Terminal 2
##*3# Terminal 3
##*4# Terminal 4
3 Enter the extension number of the terminal that you want to assign ® press #.
R Example: For extension 101, enter 101#.
4 Emergency terminal
Skip this step.
Terminals 1–4
Enter a feature number to specify the terminal
’s name.
R This name can be used to call the terminal, and can be displayed when a station receives a call from the
terminal.
Feature number Description
01# (default) TERMINAL #
02# RECEPTION
03# GATE
04# CONTROL ROOM
05# RESTAURANT
06# HALL
07# POOL
08# SECURITY OFFICE
09# ENTRANCE
10# GYM
11# GUEST ROOM
12# KID’S ROOM
13# PARKING
14# TERRACE
15# LIFT LOBBY
49
5. Programming
To Next Page
Loading...
