6.3 Facility staff operations
Facility staff can use an extension telephone of a PBX to perform a variety of operations.
Operations available when not on a call
1. Dial the extension number assigned to the control box.
2. Enter the feature number according to the feature you want to operate.
Feature number Assignment
(room number) # Call the specified room number
*1 Call lobby station 1
*2 Call lobby station 2
*3 Call lobby station 3
##00# Switch the visitor call mode to room mode
##01# Switch the visitor call mode to reception mode
3. Follow the voice guidance.
Operations available when on a call
Enter the feature number according to the feature you want to operate.
Feature number Assignment
*000# Open the entrance door(s)
* (2-digit floor
number) #
Open the entrance door(s)
and allow the lift to visit the
specified floor
*# Repeat the voice guidance
Room mode vs. reception mode
When
the visitor call mode setting is set to room mode, lobby visitors can call a specific resident or room number, and
speak with residents directly. The resident can open the entrance door based on the conversation he/she had with
the visitor.
When the visitor call mode setting is set to reception mode, calls from lobby visitors are directed to a reception terminal,
even if the visitor called a specific resident or room number. Visitors do not speak directly with residents. The reception
terminal user can open the entrance door based on the conversation he/she had with the resident.
61
6. Basic Operations
To Next Page
Loading...
