Control Box — General settings
Parameter Description and available settings Default
Monitor Time Out Determines the amount of time that passes when
watching camera images before the standby screen is
displayed.
[0]: 180 SEC
[1]: 90 SEC
[2]: 60 SEC
[3]: 30 SEC
0
(180 SEC)
Talk Time Out Determines the amount of time that passes when
talking before the standby screen is displayed.
[0]: 90 SEC
[1]: 60 SEC
[2]: 30 SEC
[3]: 180 SEC
[4]: 300 SEC
0
(90 SEC)
Camera Signal Tells the system what signal format is used by the
external camera.
[0]: PAL
[1]: NTSC
0
(PAL)
Lift Signal Mode Determines the signalling method used by the lift
controller
to communicate with the lift. Select the signal
type according to the specifications of the lift.
[0]: RELAY
[1]: BINARY
0
(RELAY)
Lift Signal Time After a visitor is admitted, this setting determines the
amount of time that the visitor can use the lift to visit the
corresponding floor.
If the lift has a similar setting, set this parameter to any
value other than "0"; the lift setting will take priority.
(1–900 SEC, or 0 to disable)
300
(300 SEC)
Visitor Call Mode Determines if visitors can call rooms directly or if their
calls are directed to a reception terminal.
[0]: ROOM MODE
[1]: RECEPTION MODE
0
(ROOM MODE)
Terminal 1–4 Extension Number Tells the system the extension number for terminal 1–
4.
(24 digits max.)
—
Terminal 1–4 Name Code Determines the name for terminal 1–4.
[1]: TERMINAL #
[2]: RECEPTION
[3]: GATE
[4]: CONTROL ROOM
[5]: RESTAURANT
[6]: HALL
[7]: POOL
[8]: SECURITY OFFICE
[9]: ENTRANCE
[10]: GYM
[11]: GUEST ROOM
[12]: KID’S ROOM
[13]: PARKING
[14]: TERRACE
[15]: LIFT LOBBY
1
(TERMINAL #)
43
5. Programming
To Next Page
Loading...
