Panasonic WJ-ND400K - 2-Port Operation

27
Hub
PC
PC
Recorder
Network cameras
Hub
LAN cable
(Locally procured: 10BASE-T /
100BASE-TX / 1000BASE-T
category 5e, straight (NTSC model) /
category 7, straight (PAL model))
● 2-port operation
Direct connection using a hub
Connect cameras and PCs using the camera port and the client PC port at the rear of the recorder.
Images from the cameras transmitted to the camera port will be transmitted to the PCs from the client PC port.
Important:
 • Connectthecablefromthehubtowhichthecamerasareconnectedtothecameraport,andconnectthecablefromthehubto
which the PCs are connected to the client PC port.
An incorrect connection may lower the transmission efficiency.