43
■ Check the IP address
It is possible to check the DHCP status, IP address, subnet mask, gateway* and HTTP port* for each port. Each port will be dis-
played as follows.
Camera port: PT#1, Client PC port: PT#2, Maintenance port: PT#3
The display of each port can be shifted using the arrow button (left or right).
* The settings of "Gateway" and "HTTP port" can be checked with the display of the client PC port (PT#2).
The default network settings of the recorder are as follows.
Item Camera port Client PC port Maintenance port
DHCP − OFF −
IP address 192.168.0.250 192.168.1.250 192.168.2.250
Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0
Default gateway − 192.168.1.1 −
HTTP port − 80 −
Shift the display and configure each setting as described below.
The display on the LCD will shift by pressing the arrow button (up or down).
[SET]
[ESC]
To Next Page
Loading...
