Panasonic WJ-ND400K

32
● Connecting the extension units
Up to 5 extension units can be connected to a single recorder. Use the dedicated connection cable (provided with the extension unit)
to connect between the external storage (EXT STORAGE) connector at the rear of the recorder and an extension unit.
When connecting multiple extension units (WJ-HDE400) or when adding extension units, connect as follows. Refer also to the operat-
ing instructions of the extension unit.
Important:
 • Useonlytheconnectioncableprovidedwiththeextensionunitwhenconnectingtherecorderandtheextensionunit.
 • Fixtheconnectioncablewiththecableclampprovidedwiththeextentionunittopreventdisconnectionoranunstableconnec-
tionthatmaycauserecordingfailuresoranunstablesystem.
 • Donotwindthecableinacoil.
4
5
Attach a cable clamp
to each connection cable.
Fix the connection cable
3 2
1
Connection cable
(provided with extension unit)
Network disk recorder
Extension unit (unit number 3)
Extension unit (unit number 2)
Extension unit (unit number 1)
Connection cable (provided with extension unit)
Extension unit (unit number 4)
Extension unit (unit number 5)