38
● Alarm connection
When a signal is supplied to the alarm input terminals 1 - 32 (pin nos. 1 - 12, 15 - 25 of the ALARM connector, pin nos. 1 - 9 of the
ALARM/CONTROL connector), recording and displaying of images from the cameras will be performed according to the settings.
When an alarm device such as a buzzer, a lamp, etc., is installed outside, connect them to the alarm output terminals (pin no. 21 of
the ALARM/CONTROL connector).
ALARM
21
9
Alarm equipment
Relays etc.*
ALARM/CONTROL
(Alarm input 17)
(Signal ground)
Sensor
Door security
switch
(Alarm input 1)
(Alarm output)
*Attached when necessary.
(Signal ground)
13
114
To Next Page
Loading...
