59
Problem Check item/Remedy Ref. page
The power cord insulation is
damaged.
The power cord, plug and connectors are worn out.
This may result in electric shock or a fire.
Remove the power plug from the AC outlet immediately, and refer to
qualified service personnel.
–
The power cord, plug and
connectors get hot during
use.
The power cord gets hot
when bent or stretched.
The "MAIN ERR INITIAL" indi-
cation is displayed on the
LCD.
Set the HDD operation mode.
52
The "EXTu ERR INITIAL ERR"
indication is displayed on the
LCD. (u: Unit number)
Connect the extension unit again after resetting its settings to the default.
Refer to the
operating
instructions of
the extension
unit.
To Next Page
Loading...
