To Next PageTo Next PageHow to fix Panasonic WJ-NV200K DVR if cannot control the cameras?
Verify the camera numbers and IP addresses displayed on the setup menu, specifically in the "Advanced setup" menu, on the [Camera] page, within the [Camera registration] tab. Also, check if the user name and password have been correctly entered in the same location.
Why I cannot play back images on my Panasonic DVR?
First, ensure there are recorded images on the hard disk drives. If there are recorded images, check the user level settings because users logged into the system may not be authorized to playback images recorded on the hard disk drives or to display images from the cameras.
What to do if Panasonic DVR recording cannot be performed?
Check if "On" is selected for "Recording mode" and ensure the settings are appropriate. Also, verify that the settings of the schedules are appropriate.
Why is my Panasonic WJ-NV200K DVR clock keeping bad time?
The clock of the Panasonic DVR may keep bad time if the built-in battery has not been sufficiently charged. Charge the built-in backup battery by turning on the power for 48 hours or more. Also, the built-in backup battery may be depleted; its life is around 5 years, indicating it may need replacement.
What to do if the Panasonic DVR "Thermal error" indication is displayed on the main monitor?
The "Thermal error" indication appears when the ambient operating temperature exceeds +45 °C {113 °F}. It's recommended to change the installation environment to maintain an ambient temperature of approximately +25 °C {77 °F}.
Why is the Panasonic WJ-NV200K DVR error indicator lights orange and the recorder stops?
The Panasonic DVR recorder may stop due to a thermal error. This can occur if the cooling fan is out of order, the ventilation openings or the cooling fan are blocked, or the temperature inside the recorder is too high or low. Check if dust is collected around the ventilation openings and ensure the recorder is used at appropriate ambient temperatures.
What to do if I cannot access Panasonic DVR from the web browser?
Check the following: * Ensure the Ethernet cable is firmly connected to the 10BASE-T, 100BASE-TX or 1000BASE-T port. * Confirm the link indicator (orange) of the network port is lit; if not, LAN connection might not be established or the network is not working. * Verify a valid IP address is set and that you are not accessing the wrong IP address by pinging the DVR's IP address. * Ensure the same IP address is not assigned to other devices and that there are no contradictions between the address and the network subnet being accessed. If the recorder and PC are on the same subnet, ensure the same subnet is set for both.
General| Category | DVR |
|---|---|
| Recording Resolution | 1920 x 1080 |
| Hard Disk Drive Bays | 1 |
| Audio Output | 1 x RCA |
| USB Ports | 2 x USB 2.0 |
| Video Compression | H.264 |
| Video Output | 1 x HDMI |
| Network Interface | 1 x RJ-45 |
| Power Supply | AC 100V - 240V |
| Operating Temperature | 0°C to 40°C |
Lists the recommended OS, browser, CPU, memory, and monitor for PC operation.
Explains the face recognition function and conditions for its operation.
Describes the motion detection function and situations where it may not work.
Details the default control screen layout and its interactive elements.
Steps to display live images from cameras in a 1-screen format.
Description of the buttons and status indicators on the playback operation panel.
Step-by-step guide to playing back images from a specific recorded time and date.
How to play recorded images by selecting entries from alarm or error logs.
Details the camera control interface and its available functions for selected cameras.
Where to find network settings for the recorder within the setup menu.
Steps to configure TCP/IP settings on a PC to match recorder network settings.
Explains user authentication and changing the HTTP port for access restriction.
Methods to improve network security, such as subnet division and VPN usage.
Logging into the recorder using registered user credentials.
Accessing camera-specific controls like zoom, focus, and auto mode via the CAM tab.
Steps to display live images from a single selected camera.
Instructions for playing images copied onto an SD card using the viewer software.
