130
Setting Your Machine
User Parameters
General Description
Your machine has several basic settings (User Parameters) to help you keep records of the documents you send or
receive. For example, the built-in clock keeps the current date and time, your LOGO and ID Number help to identify you
when you send or receive documents.
These parameters can be programmed via your PC by using the Configuration Editor included with the Panasonic
Document Management System software CD-ROM (included with the machine).
Follow the Operating Instructions included with the Panasonic Document Management System application.
Setting the User Parameters
NOTE
1. The special characters of Å, Ä, Ö, Ü, Æ, È and É cannot be used for Character ID.
2. If you make a mistake, use or to move the cursor beyond of the incorrect number,
press then reenter the new number.
3. The current Date & Time must be set because it is required by the Telephone Consumer
Act of 1991. (For details, see FCC NOTICE at the end of these Operating Instructions.)
4. Your Company Name or your name must be set as your LOGO because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of these
Operating Instructions.)
2
1
3
CHARACTER ID
HEAD OFFICE
CHARACTER ID
LOGO
PANASONIC
Enter your Character ID (max.
16 characters and digits)
Ex: HEAD OFFICE
DATE & TIME
01-01-2003 12:00
Enter the new date and time.
Ex: 04 06 2004 1500
7 86
CLEAR
To Next Page
Loading...
Need help?
General
