140
Setting Your Machine
Fax Parameters
No. Parameter Setting
Number
Setting Comments
001 CONTRAST
(HOME)
1 Lightest Setting the home position for the CONTRAST.
2 Lighter
*3 Normal
4 Darker
5 Darkest
002 RESOLUTION
(HOME)
1 Standard Setting the home position for the RESOLUTION.
(S-Fine is selecting 400 or 600 dpi. See Fax Parameter
No. 120.)
*2 Fine
3 S-Fine
003 ORIGINAL
(HOME)
*1 TEXT Setting the home position for the ORIGINAL.
2 TEXT/
PHOTO
3 PHOTO
004 STAMP
(HOME)
*1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored
in memory, see Fax Parameter No. 28.
2 On
005 MEMORY
(HOME)
1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2 From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date
& time, remote ID, percentage of reduction and page
number on the bottom of each received document.
2 Valid
012 COMM. JOURNAL
(HOME)
1 Off Selecting the home position of printout mode for
COMM. Journal Off/Always/Inc. only.
Off : Does not print
Always : Always prints
Inc. Only : Prints only when communication has failed.
2 Always
*3 Inc. Only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
*2 Valid
014 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file
acceptance journal.
If you set this parameter to valid, a journal will print out
after any memory communication.
2 Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
*2 Auto
022 SUBSTITUTE RECEIVE 1 Invalid Selecting whether the machine receives to memory
when the recording paper runs out, toner runs out or
the recording paper is jammed.
*2 Valid
To Next Page
Loading...
