141
Setting
Your Machine
024 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed :Reduce received document according to
setting of Parameter No. 25.
Auto :Reduce received document according to the
length of received documents.
*2 Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to
100%. This parameter functions only when the fixed
print reduction is selected on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
027 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2 Valid
028 STAMP AT MEMORY
XMT
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(depending on the Stamp setting on the Control Panel.
If the setting is "Invalid", the machine will not stamp
even if the Stamp LED light is ON)
*2 Valid
031 INCOMPLETE FILE
SAVE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully
transmitted.
2 Valid
036 RING PATTERN
DETECT (DRD)
(See Note 2)
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the
type C described above.
037 RECEIVE TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO
MEMORY). When F8-5 is set to On, this parameter will
not be shown on the LCD display.
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine
from unauthorized use. (See page
146)
039 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
042 CONF. POLLED FILE
SAVE
*1 Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2 Valid
043 PASSWORD-XMT *1 Off Setting a 4-digit XMT-Password and selecting whether
the machine performs and checks the XMT-Password
of the receiving station when transmitting.
2 On
044 PASSWORD-RCV *1 Off Setting a 4-digit RCV-Password and selecting whether
the machine performs and checks the RCV-Password
of the transmitting station when receiving.
2 On
046 SELECT RCV *1 Invalid Selecting whether the machine performs selective
reception. (See page 90)
2 Valid
No. Parameter Setting
Number
Setting Comments
Continued on the next page...
To Next Page
Loading...
Need help?
General
