84
Using Password Transmission
Using Password Reception
There is no additional operation required once you set the parameter by following the procedure on page 82. The
parameter, “OFF” or “ON”, cannot be selected for each reception. It is either always “OFF” or “ON” until the setting is
changed.
2
1
5
Use the following
procedure to select
whether the password
is checked
(PASSWORD-XMT
“OFF” or “ON” for each
Transmission)
ENTER STATION(S)
THEN PRESS START 00%
Dial by any one of the following methods:
• Quick Name Search
• One-Touch/ABBR Dialing
• Manual Number Dialing
• Directory Search Dialing
(For details, see page 20)
or
Advanced Facsimile Features
Password Communications
To Next Page
Loading...
