130
Advanced Internet Fax Features
Relayed Transmission
Sending via an Internet Relay
To a Location that Has a
programmed Relay Station
Once you have recorded all
the necessary parameters in
your machine, you can send
a document to one, or
multiple G3 Fax machines
automatically through the
Internet Relay Station by
using the following
procedure. The Internet
Relay Station must have all
the required parameters
setup.
2 3
Enter only the telephone
number(s) of the End
Receiving Station(s) by any
combination of the
following methods:
• One-Touch (Option)
• ABBR Dialing
• Directory Search Dialing
(For details, see page 22)
Ex:
ABBR
0 1 0
SET
or
If set on other
function mode.
1
Sending via an Internet Relay
NOTE
1. The "#" character is not available for the email address of the relay station.
2
1
The document(s) is stored into memory and your machine starts
sending the document(s) to the Relay email address of the Relay
Station with the telephone number for the End Receiving Station.
Ex: End Receiving Station : 4681111234 (Telephone Number)
[see Note]
Relay Station : uk-rly@london.panasonic.co.uk
After the Relay Station completes its transmission to the End
Receiving Station(s), your machine receives a COMM. Journal from
the Relay Station.
This Journal confirms whether the Internet Relayed Transmission
was successful.
3
[010]STOCKHOLM
4681111234
6
7
To a Location that Does Not Have a pre-programmed Relay Station
or
If set on other
function mode.
To Next Page
Loading...
Need help?
General
