Panasonic Workio DP-8020

128
Advanced Internet Fax Features
Relayed Transmission
 Programming the End Receiving Station into your Auto Dialer
If the Fax Parameter No. 140
(LAN RLY XMT REQ) is set
to "Valid", you can enter the
Relay Address by the
following procedure.
(See page 151)
1
[001]
E
NTER EMAIL ADDRESS
2
5
If set on other
function mode.
To set an One-Touch/ABBR Dialing for Relayed Transmission Request
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations
are both in the same area, omit the Country
Code and the Area Code from the End
Receiving Station. The End Receiving Station
is a local telephone number as viewed from
the Relay Station.
[001]
E
NTER TEL. NO.
Ex: 3961111234 and press
SET
6
Change to
Telephone No.
input mode.