151
Setting
Your Machine
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2 Valid
141 LAN XMT REDUCE *1 Invalid Selecting whether to automatically reduce from LEDGER/
B4 to A4, when LEDGER/B4 documents are transmitted via
LAN.
Invalid : No reduction
Valid : Automatic reduction from LEDGER/B4 to A4
2 Valid
142 RELAY XMT 1 Invalid Selecting whether the machine accepts and performs LAN
relayed transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT 1 Off Setting how the COMM. Journal for relayed transmission is
sent to the originator.
Off : Don’t send.
Always : Always send.
Inc. only : Send only if communication has failed.
*2 Always
3 Inc. only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email
address before each transmission.
2 Valid
146 POP TIMER ---- 0 to 60 min. Setting the time interval for the machine to check for email
on the POP Server.
(0 = Does not check the POP Server for email.)
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically downloads an
email from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted automatically
after retrieval from the POP Server.
*2 Valid
149 DELETE POP ERROR
EMAIL
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
150 IFAX RETURN RECEIPT 1 Invalid Selecting whether to send a return receipt when receiving
from another Panasonic Internet Fax.
*2 Valid
151 EMAIL HEADER
FORMAT
1 All Selecting the header information to print when an email is
received. (Normally used for Troubleshooting. It shows the
path of the email transmission before arriving at your
machine.)
*2 Subject/
From/To
3 Off
152 SUB-ADDRESS
ROUTING
*1 Invalid Selecting whether to automatically route a received fax, or
email using ITU-T sub-address.
2 Valid
153 TSI ROUTING *1 Invalid Selecting whether to route a received fax to a telephone
number, or an email address preprogrammed in the Phone
Book using the originating fax’s Numeric ID (TSI Frame
Information).
2 Valid
154 ROUTING HEADER
FORMAT
*1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
Originator : The originating fax machine’s TSI will
appear in the "From" field of the routed
email.
Relay Station : The routing station’s email address will
appear in the "From" field of the routed
email.
2 Relay
Station
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...
To Next Page
Loading...
Need help?
General
