169
Problem Solving
430/434 Communication error occurred while receiving. Check with the other party. --
436/490 Received data has too many errors. Check with the other party. --
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
104
492/493/
494
Communication error occurred while receiving. Check with the other party. --
495 Telephone line disconnected. Check with the other party. --
501/502/
503/504
Communication error occurred using the internal V.34
Modem.
Check with the other party. --
540/541/
542/
543/544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party.
--
550 Telephone line disconnected. Check with the other party. --
552/553/
554/555
Communication error occurred while receiving. Check with the other party. --
580 Sub-Address Transmission to a unit that has no Sub-
Address function.
Check the remote station. 84
581 Sub-Address Password Transmission to a unit that
has no Password Sub-Address function.
Check the remote station. 84
623 No document loaded on the ADF. Reload the document and send again. --
630 Redial was not successful due to a busy line. Reload the document and send again. --
631/700 During dialing, STOP was pressed. Reload the document and send again. --
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again. --
638 Power failure occurred during the communication. Check the power cord and plug. --
711 Incorrect LDAP settings. Check the LDAP Server Name, LDAP Login
Name, LDAP password, LDAP Search Base.
56
57
712 Incorrect email address. Check the email address and send again.
Check the IP Address of the SMTP Server
with the Network Administrator.
--
714 Cannot Log on to the LAN. Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
--
Info.
Code
Meaning Possible Action Page
Continued on the next page...
To Next Page
Loading...
Need help?
General
