1 2
Open the Stamp Holder and
remove by pulling the Stamp
Assembly upward.
3 4
6
Close the ADF.
7
Remove the Stamp. Replace the stamp with a new one or
refill the stamp with a few drops of the specified ink into the
back of the stamp.
Verification Stamp Order No.:
DZHT000027 (for USA and Canada)
DZHT000004 (for other countries)
5
Reattach the
Scanning Pad.
3 4
1. Remove by pulling the Stamp Assembly upward.
2. Remove the Stamp. Replace the stamp with a new
one or refill the stamp with a few drops of the
specified ink into the back of the stamp.
Verification Stamp Order No.:
DZHT000027 (for USA and Canada)
DZHT000004 (for other countries)
Reinstall the Stamp Assembly.
5
175
Problem Solving
NOTE
2. Stamp ink refills can be purchased from a stationary store. Use blue Shachihata "X" Stamp ink
(No. 22113) or its equivalent.
To Next Page
Loading...
Need help?
General
