Panasonic WV-CW590G

13
Notes:
•Ifzoomlimitissettomorethan36x,thenzoom
operationpausesat36xmagnification.
•Increasingthezoomtoover36xmagnification
(digitalzoom)decreasestheresolution.
•Youcannotsetazoommagnificationofgreater
than36xasapresetposition.
A Auto Image Stabilizer (STABILIZER)
This function electronically compensates for an
unstable camera image due to movement of a
mounting pole or bracket.
1. Move the cursor to STABILIZER, and then tilt the
joystickleftorrighttoturnthestabilizeronoroff.
ON : Automatically compensates for an unstable
image.
OFF :Image stabilizer will not operate. This is the
factory default setting.
  ThefactorydefaultsettingisOFF.
Notes:
•Thestabilizermaynotbeeffectiveforthe
following subjects.
Example:•Objectsilluminatedwithlowlighting
•Single-colorobjects
(whitewallsetc)
•Fastmovingperiodicaction,suchasmechanical
vibration, may not be tracked.
•ThestabilizerdoesnotworkduringPAN/TILT/
ZOOM/FOCUSorwhenthecamerasetupmenuis
open.
•WhensettoON,someeffectivepixelsonthe
edgeoftheCCDareusedbythestabilization
function. This may result in a small reduction in
resolution and a narrower angle of view. After
activatingtheimagestabilizerfunction,checkthat
the field of view is correct.
•Imagestabilizationmaynotfunctionwherethereis
excessivecameramovementorwhenthesceneis
low light or low contrast objects.