Panasonic WV-CW590G

5
About the setup menus
This manual describe procedures for operating system
controller WV-CU650.
All setting configuration procedures start from the setup
menu. This section explains how to display the setup
menu and provides details about the menu items that it
contains.
n Displaying the Setup Menu
l When using the WV-CU650
 (1) Select the camera (this camera), and the
monitor where displays the setup menu.
 (2) Press the MENU button to display LCD MENU
CAM 101.
 (3) PresstheENTERbuttonorCAM(SET)buttonto
display CAMERA SETUP.
 (4) Press the F1button.
Refer to the pages below for details.
1 CAMERA ID Camera ID Settings This page
2 SCENESELECT SceneSelectSettingsPage6
3 PRESETPOSITION PresetPositionSettingsPage6
4 LANGUAGE LanguageSettingPage8
5 ADVANCEDSETUP AdvancedMenuSettingsPage8
Note:
•Thesetupmenusherearequicksetupmenus.
n Camera ID Settings
The camera ID is a series of alphanumeric
characters that indicate the location of the camera.
This item can be used to turn display of the camera
ID on the monitor screen on or off, and to input the
camera ID.
1. Move the cursor to CAMERA ID, and then tilt the
joystickleftorrighttotogglecameraIDdisplayON
andOFF.
2. SelectONorOFF,andthenpresstheCAM(SET)
button.
ThefactorydefaultsettingisOFF.
3. Use the joystick to move the cursor the character
you want to input, and then press the CAM (SET)
button.
This will cause the selected character to appear in
the camera ID input area. Repeat step 3 as many
times as necessary to input all of the characters for
thecameraID.(Example:DOOR)
To input a blank space
Move the cursor to SPACE, and then press the CAM
(SET)button.
To delete all previously input characters
Move the cursor to RESET, and then press the CAM
(SET)button.
To change previously input characters
Use the joystick to move the cursor to the camera
IDinputarea.Next, tilt the joystick leftandrightto
move the ↑ pointer to the character you want to
change.Finally,usestep3aboveto input the new
character.
4. Move the cursor to POSI, and then pressthe CAM
(SET)button.
This will display the ID position setting menu.
5. Use the joystick to select a camera ID display
position,andthenpresstheMON(ESC)button.
This registers the camera ID display position and
returns to the camera setting menu.
1
3
5
2
4
MODEL WV-CW590 SERIES
CAMERA ID OFF
SCENE SELECT
PRESET POSITION
LANGUAGE
→ ADVANCED SETUP
DOOR
CAMERA ID. ---
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-
*
/%$
SPACE
---- POSI RET RESET
DOOR............
Camera ID Input area