Shortcuts
ShortcutsaresupportedwhenyouareusingthesystemcontrollerthathasaCAMFUNCTIONbutton.Withshortcuts,
you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAM
FUNCTIONbutton.
The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the
camera to a preset position by inputting the applicable position number on the 10-key pad.
Controller Operation Setting
[6]+[5]+[CAMFUNCTION] AUTOPANON
[6]+[6]+[CAMFUNCTION] AUTOPANOFF
[6]+[7]+[CAMFUNCTION] IncreasesAUTOPANspeedonestep.
[6]+[8]+[CAMFUNCTION] DecreasesAUTOPANspeedonestep.
[6]+[9]+[CAMFUNCTION] SetsAUTOPANstartpoint.
[7]+[0]+[CAMFUNCTION] SetsAUTOPANendpoint.
[7]+[1]+[CAMFUNCTION] AUTOMODE:OFF
[7]+[2]+[CAMFUNCTION] AUTOMODE:SEQON
[7]+[3]+[CAMFUNCTION] AUTOMODE:SORTON
[7]+[4]+[CAMFUNCTION] ReversesAUTOPANrange.
[7]+[6]+[CAMFUNCTION] ENDLESS:ON
[7]+[7]+[CAMFUNCTION] ENDLESS:OFF
[7]+[8]+[CAMFUNCTION] DIGITALFLIP:ON
[7]+[9]+[CAMFUNCTION] DIGITALFLIP:OFF
[8]+[0]+[CAMFUNCTION] PROPO.P/T:ON
[8]+[1]+[CAMFUNCTION] PROPO.P/T:OFF
[8]+[4]+[CAMFUNCTION] SUPER-D6:ON
[8]+[5]+[CAMFUNCTION] SUPER-D6:OFF
[8]+[6]+[CAMFUNCTION] AFMODE:AUTO
[8]+[8]+[CAMFUNCTION] Performsautofocus.
[8]+[9]+[CAMFUNCTION] Movestohomeposition.
[9]+[0]+[CAMFUNCTION] BW:ON
[9]+[1]+[CAMFUNCTION] BW:OFF
[9]+[2]+[CAMFUNCTION] BW:AUTO
[9]+[3]+[CAMFUNCTION] CAMERAID:ON
[9]+[4]+[CAMFUNCTION] CAMERAID:OFF
[9]+[5]+[CAMFUNCTION] AREATITLE:ON(NESW)
[9]+[6]+[CAMFUNCTION] AREATITLE:ON(USER)
[9]+[7]+[CAMFUNCTION] AREATITLE:OFF
[1]+[0]+[0]+[CAMFUNCTION] Adjustscameraposition(REFRESH)
[1]+[0]+[1]+[CAMFUNCTION]~ Registersapositiontoapresetnumber(1to64).
[1]+[6]+[4]+[CAMFUNCTION]
[1]+[6]+[5]+[CAMFUNCTION] PATROL1:PLAY
[1]+[6]+[6]+[CAMFUNCTION] PATROL1-PATROL4:STOP
[1]+[6]+[7]+[CAMFUNCTION] PATROL1:LEARNstart
[1]+[6]+[9]+[CAMFUNCTION] IRIS:OPEN
Notes:
•Turnoffdigitalflipbeforeregisteringpresetpositions.IfNOREGS.;FLIPONappears,dothesettingagain.
•Shortcutsmaynotbeperformediftheyareexecutedwhileapan,tilt,zoom,orfocusoperationisinprogress.
•Shortcuts1through64,169,170,and301~556canbesavedaspartofapatrolroutine.
•Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY
operation to stop.