Panasonic WV-CW590G

6
n Scene Select Settings
Display the scene select setting menu from the setup
menutoconfiguresceneselectsettings.First,display
the scene select setting menu.
1. Display theadvanced setupmenu (page8), move
thecursortoSCENESELECT
, and then press the
CAM(SET)button.
This will display the scene select setting menu.
l Scene Select Settings
Use the following procedure to configure scene select
settings.
1. MovethecursortoSCENE,andthentiltthejoystick
left or right to change the scene setup.
INDOOR (L) :Indoor setting (picture quality
priority)
INDOOR (H) :Indoor setting (sensitivity
priority)
OUTDOOR (L) :O u t d o o r  s e t t i n g  ( p i c t u re
qualitypriority)
OUTDOOR (H) :Outdoor setting (sensitivity
priority)
Settings related to the picture switch depending on
the scene settings. Scene select settings and
relationship to other settings are shown in the table
below.
  Defaultvalues:
INDOOR (L) :
WV-CS580
OUTDOOR (L):
WV-CW590
2. MovethecursortoLOAD,andthenpresstheCAM
(SET)button.
  ThiswillcausethesetupyouselectedforSCENEin
step 1 to be applied to the image.
n Preset Position Settings
l Position Number Selection (MAP)
You could use the MAP item on the pan/tilt setup menu
instead of the PRESET item to select a position number.
The preset position number 1-4 can also be linked
withalarmfunction(page23).
1. MovethecursortoPRESETPOSITION
, and then
presstheCAM(SET)button.
2. Move the cursor to the number you want to select,
andthenpresstheCAM(SET)button.
This registers the position number setting and
displaysthepresetsettingmenu.(thispage)
To select a position number in the range of 033 to
064, move the cursor to 33-64 in the lower left corner
ofthemenu,andthen presstheCAM(SET)button.
Preset numbers set subsequently are the same.
Notes:
•An asterisk (*) to the right of a position number
indicates that it already has a preset position
assigned to it.
The home position number is indicated by the
letterHnexttotheasterisk(*).
•When the cursor is located at a position number
thathasapositionID,thepositionIDtextappears
nexttoID:onthemenuscreen.
l Position Setting (POSITION SET)
The position setting can be used to specify the camera
position (pan and tilt), the lens zoom setting, and the
focus setting.
1.Movethecursorto POSITIONSET
and press the
CAM(SET)buttontodisplaythepositionsettingmenu.
**SCENE SELECT**
SCENE OUTDOOR(L)
LOAD
RET TOP
**PRESET POSITION**
2
6
10
14
18
22
26
30
1*
5
9
13
17
21
25
29
ID:
033-064 225-256
RET TOP
3
7
11
15
19
23
27
31
4
8
12
16
20
24
28
32
**PRESET POSITION**
34
38
42
46
50
54
58
62
33
37
41
45
49
53
57
61
ID:
065-096 001-032
RET TOP
35
39
43
47
51
55
59
63
36
40
44
48
52
56
60
64
PRESET NO. 1*
POSITION SET
PRESET ID
RET TOP DEL
ON
   BW DNR WHITEBAL
 INDOOR(L) OFF LOW ATW1
 INDOOR(H) OFF HIGH ATW1
 OUTDOOR(L) AUTO LOW ATW2
 OUTDOOR(H) AUTO HIGH ATW2
   AGC SENSUP SHUTTER
 INDOOR(L) MID OFF OFF
 INDOOR(H) HIGH ×2AUTO OFF
 OUTDOOR(L) MID OFF AUTO
 OUTDOOR(H) HIGH ×2AUTO AUTO