10
Precautions
Refer installation work to the dealer.
Installationworkrequirestechniqueandexperi-
ences. Failure to observe this may cause fire,
electricshock,injury,ordamagetothisproduct.
Besuretoconsultthedealer.
Stop the operation immediately when
something is wrong with this product.
When smoke goes up from the product, the
smellofsmokecomesfromtheproduct,orthe
exterior of the product has deteriorated, con-
tinuedusewillcauseafireorfalloftheproduct
resultingininjury,accidents, ordamagetothe
product.
Turn the power off immediately and contact
qualifiedservicepersonnelforservice.
Do not attempt to disassemble or modify
this product.
Failureto observe this maycausefire or elec-
tricshock.
Consultthedealerfortherepairorinspections.
Do not insert any foreign objects.
Thiscouldpermanentlydamagethisproduct.
Turn the power off immediately and contact
qualifiedservicepersonnelforservice.
Select an installation area that can sup-
port the total weight.
Selecting an inappropriate installation surface
maycausethis producttofall down ortopple
over,resultingininjury.
Installationworkshallbestartedaftersufficient
reinforcement.
Periodic inspections shall be conducted.
Rustonthemetalpartsorscrewsmaycausea
fall of the product resulting in injury or acci-
dents.
Consultthedealerfortheinspections.
Do not use this product in an inflammable
atmosphere.
Failuretoobservethismaycauseanexplosion
resultingininjury.
Avoid installing this bracket in the loca-
tions where salt damage occurs or corro-
sive gas is produced.
Otherwise, the mounting portions will deterio-
rateandaccidentssuchasafalloftheproduct
mayoccur.
Do not install this product in locations
subject to vibration.
Loosening of mounting screws or bolts may
causeafalloftheproductresultingininjury.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause a drop
resultingininjuryoraccidents.
Do not strike or give a strong shock to this
product.
Failuretoobservethismaycausefireorinjury.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock.Inaddition,shortcircuitorwrongwiring
maycausefire.
The exclusively designed mount bracket
shall be used.
Failure to observe this may cause a drop
resultingininjuryoraccidents.
Usetheexclusivelydesignedmountbracketfor
installation.
The screws and bolts must be tightened to
the specified torque.
Failure to observe this may cause a drop
resultingininjuryoraccidents.
Do not rub the edges of metal parts with
your hand.
Failuretoobservethismaycauseinjury.