Panasonic WV-SPW631L

33
Attaching the mounting surface on the top surface of the camera body
Whenthemountingsurfaceischangedtothetopsurfaceofthecamerabody
1

Removethe4sunshieldfixingscrewsfromthecamerabodyandremovethesunshield.
2

Removethe4tripodheadfixingscrewsfromthecamerabodyandremovethetripodhead.
3

Loosenthefixingscrewx1andremovetherearcover,andremovethecap.
4

Rotateeachcableinthedirectionofthearrow(clockwise)asillustratedandpassthembetween
openingintheuppergrooveofthemainbody.
 Then,attachthecaptothelowergroove,andsecuretherearcoverwiththefixingscrewx1.
Attachtherearcovertothefrontcoverbyhookingattachmenthole1oftherearcovertothetabonthe
frontcoverwhilepassingtheprotrusionofthefrontcoverthroughattachmenthole2oftherearcover.
Tab
Protrusion
Upper groove
Attachment hole 1
Attachment
hole 2
Cap
Tripod head fixing screw x4
Rear cover Fixing screw x1
Tripod head