Panasonic WV-SPW631L

36
Configure the network settings
Configuring the camera so that it can be accessed from a PC
Thefollowingaredescriptionsforwhenthecamerawithdefaultsettingsisconfigured.Ifyou
areusingfirewallsoftwareonyourPC,theSetupProgrammaynotbeabletofindany
camerasonyournetwork.Configurethesettingofthecameraaftertemporarilyinvalidating
thefirewallsoftware.ContactthenetworkadministratororyourInternetserviceproviderfor
informationaboutconfiguringthesettingsofthenetwork.
1 InserttheprovidedCD-ROMintotheCD-ROMdriveofyourPC.
 • TheLicenseAgreementwillbedisplayed.ReadtheAgreementandchoose“Iacceptthe
terminthelicenseagreement”,andclick[OK].
 • The launcher window will be displayed. If the launcher window is not displayed, double
clickthe“CDLauncher.exe”fileontheCD-ROM.
Note:
 • Refer to“UsingtheCD-ROM”intheOperatingInstructionsontheprovided CD-ROMforfur-
therinformationaboutCDLauncher.
2Clickthe[Run]buttonnextto[IPSettingSoftware].
 [PanasonicIPSetting]screenwillbedisplayed.Clickthe[NetworkSettings]buttonafterselect-
ingtheMACaddress/IPaddressofthecameratobeconfigured.