37
3Selectthecamerayouwanttoconfigure,andclick[AccessCamera].
Note:
• When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same
MACaddressastheMACaddressprintedonthecamerathatyouwanttoconfigure.
4Iftheinstallationscreenoftheviewersoftware“NetworkCameraView4S”isdisplayed,follow
theinstructionsofthewizardtostarttheinstallation.(Theviewersoftwareisinstalledfromthe
camera.)
• The“Live”pagewillbedisplayed.
• Ifyoucannotinstalltheviewersoftware“NetworkCameraView4S”orifimagesarenot
displayed,clickthe[Install]buttonnextto[ViewerSoftware]onthelauncherwindowto
installthesoftware.
• Performthe[Time&date]settingsinthe“Setup”-“Basic”pagebeforeusingthecamera.
Note:
• Whennoimageisdisplayedonthe“Live”page,refertotheTroubleshootingintheOperating
InstructionsontheprovidedCD-ROM.
• Itispossibletoenhancethenetworksecuritybyencryptingtheaccesstocamerasusingthe
HTTPSfunction.RefertotheOperatinginstructionsontheprovidedCD-ROMforhowtocon-
figuretheHTTPSsettings.
• Clickthe[Setup]buttononthe“Live”page,theuserauthenticationwindowwillbedisplayed.
Enterthedefaultusernameandpasswordasfollows,andlogin.
Username:admin
Password:12345
• Whenchangingsettingsrelatedtothenetworksettings,suchasconnectionmode,IPaddress,
and subnet mask, click the [Network Settings] button in [Panasonic IP Setting] screen as
showninstep3,thenchangeeachsetting.
• Duetosecurityenhancementsin“IPSettingSoftware”,“Networksettings”ofthecameratobecon-
figuredcannotbechangedwhenaround20minuteshavepassedafterturningonthepowerofthe
camera.(Whentheeffectiveperiodissetto“20min”inthe“EasyIPSetupaccommodateperiod”.)
However,settingscanbechangedafter20minutesforcamerasintheinitialsetmode.
• “Network Camera Recorder with Viewer Software Lite” which supports live monitoring and
recordingimagesfrommultiplecamerasisavailable.Forfurtherinformation,refertoourweb-
site(http://security.panasonic.com/pss/security/support/info.html).