12
About the automatic status detection
function
When this product malfunctions due to exoge-
nous noise, etc. for 30 seconds or more, the
productwillautomaticallyresetandwillreturnto
normalstate.Whentheproductisreset,initializa-
tionwillbecarriedoutaswhenthepowerofthe
productisturned on.Whentheproductrepeat-
edly resets, exogenous noise level around the
product maybe high and that maycause mal-
function.Contactyourdealerforinstructions.
Product disposal/transfer
Datasavedonthisproductorastoragedevice
used with this product may lead to personal
informationleakage.
When it is necessary to dispose or give this
producttosomeone,evenwhenforrepair,make
surethatthereisnodataonthisproduct.
Cleaning this product body
Besuretoturnoffthe powerbefore cleaning.
Failuretoobservethismaycauseinjury.Donot
use strong abrasive detergent when cleaning
thisproduct.Otherwise,itmaycausediscolor-
ation. When using a chemical cloth for clean-
ing,readthecautionprovidedwiththechemi-
calclothproduct.
Cleaning the lens
Usealenscleaningpaper(usedtocleancam-
eralensesorlensesofspectacles).Whenusing
solvent,useanalcoholssolventanddonotuse
athinneroraglasscleaner.
Transmission interval
Imagetransmissionintervalmay become slow
depending on the network environment, PC
performance, shooting subject, access num-
ber,etc.
Periodically images on the screen appear
to be distorted
Whenthecameraisinstalledinalocationwhere
itissubjecttosmallvibrations(forexample,when
it is installed near devices that vibrate), images
mayappeardistortedandstretchedlengthways.
This phenomenon is a characteristic of image
pickup devices that use CMOS sensors and is
causedbytherelationshipbetweentheperiodic
movementsofthecameraandthetimingthatthe
imagesensorreadsimages.This is notaprob-
lemwiththecamera.Toreducethepossibilityof
thisphenomenonoccurring,installthecamerain
asecurelocation.
About SD memory card
• To remove the SD memory card, hold
down the SD ON/OFF button for about 2
seconds. When the flashing SD MOUNT
lamp goes out, you can remove the SD
memorycard.
• WhenusinganSDmemorycard,formatit
using this product. Recorded data on the
SDmemorycardwillbedeletedwhenfor-
matted.IfanunformattedSDmemorycard
or an SD memory card formatted with
other devices is used, this product may
notworkproperlyorperformancedeterio-
ration may be caused. Refer to the
Operating Instructions on the provided
CD-ROMforhowtoformatanSDmemory
card.
• When some SD memory cards are used
withthisproduct,theproductmaynotwork
properly or performance deterioration may
becaused.UsetheSDmemorycardsrec-
ommendedinpage46.
• WhenusinganSDmemorycardsupporting
Class 10 of the speed class, use a UHS-I
(UltraHighSpeed-I)compliantcard.
Discoloration on the color filter of the
MOS image sensor
• When continuously shooting a bright light
sourcesuchasaspotlight,thecolorfilter
oftheMOSimagesensormayhavedeteri-
orated and it may cause discoloration.
Even when changing the fixed shooting
direction after continuously shooting a
spotlightfor acertainperiod,thediscolor-
ationmayremain.
• Whenshootingfast-movingsubjectsorper-
forming panning/tilting operations, objects
crossingtheshootingareamaylook tobe
bendingaskew.