34
Installing the manuals
On the CD launcher window, click the [Install] button next to [Manual] to display the Manual installa-
tion window. Confirm the following settings before starting the installation.
q Select which manuals to install. The camera models that the manuals support are displayed in
w "Supported Camera Models".
w The camera models that are supported by the manuals selected in q are displayed here.
e Select where to create the manuals shortcut icon when the manuals are installed.
r Specify which folder on the PC to install the manuals to.
t Click the [Install] button to start the installation.
Installing the Viewer software
The Viewer software (Network Camera View4S) must be installed on the PC in order to display
camera images. On the CD launcher window, click the [Install] button next to [Viewer Software],
and follow the instructions displayed on the window to install the software. A message is displayed
if a PC that does not have the Viewer software installed tries to access the camera. Install the soft-
ware by following the instructions displayed on the window. Refer to "Viewer software" in the
Operating Instructions for further information.
q
r
e
w
t
To Next Page
Loading...
