26
Camera mounting
<Installing the camera directly on the ceiling or wall>
z Remove the dome cover. (3 screws) (☞ Page 16)
x Connect the cables to the camera. (☞ Pages 23 and 24)
• Waterproof the connecting portion. (
☞ Page 24)
c Secure the camera with 3 screws (M4) (locally procured).
Important:
• Do not touch the lens.
• When tightening the screws, be careful to ensure that the cables does not tangle the cables.
<Using the mount bracket>
z Connect each cable.
• Apply waterproof treatment to all connections. (
☞ Page 24)
x Connect the conduit attachment (locally procured) to the conduit.
c Secure the mount bracket to the conduit attachment with the attachment for female thread
(locally procured).
v Mount the mount bracket to either a ceiling or a wall.
(3 screws (M4) (locally procured))
b Secure the camera to the mount bracket with 3 fixing screws (accessory).
(Recommended tightening torque: 1.4 N·m {1 lbf·ft})
Installation
n
Ceiling
n
Wall
To Next Page
Loading...
