Note
• The volume level for when audio detection is performed can be changed in “Mic input volume
(Camera to PC)” on the [Audio] tab of the “Image/Audio” page. (®page 129)
[Audio detection level]
Select the level at which the camera determines that there is sound in the area around the camera when
detecting sound.
If you only want to detect loud sounds, raise the audio detection level; if you also want to detect quiet
sounds, lower the audio detection level.
Configure the audio detection level
Alarm occurrence indication button
Mic input button
Preview screen
Audio detection level
The current volume level
Range of volumes to be detected
1. Check the audio detection level and current volume level in the preview screen.
→ The volume level configured in “Mic input volume (Camera to PC)” on the [Audio] tab of the “Image/
Audio” page is displayed in the preview.
2. Adjust the “Audio detection level” with the slider bar so that it is lower than the volume level that you want
to detect.
148 Operating Instructions
13 Configure the alarm settings [Alarm]
To Next Page
Loading...
