Panasonic WV-SW598APJ - Page 97

[Digital zoom]
Select the digital zoom setting from the following.
• On (Max X1080): Images can be zoomed in on with the optical zoom (1x - 30x), extra optical zoom (up to
90x) and the electronic zoom (higher zoom factors, up to 1080x).
• Off: Does not use the digital zoom.
• Default: Off
Note
• When “On (Max X1080)” is selected, digital zooming will stop when the zoom factor has reached 90x.
• When the zoom factor is 90x or more, the setting of the preset positions will become unavailable.
[Number of Privacy zone]
Select the number of privacy zones that can be configured from the following.
• 8: Up to 8 privacy zones can be configured.
• 32: Up to 32 privacy zones can be configured.
• Default: 8
Note
• A maximum of 8 privacy zones can be displayed on 1 screen simultaneously.
[Privacy zone]
Select a display type of the privacy zone from the following.
• Gray: The privacy zones will be displayed in gray.
• Mosaic: The privacy zones will be displayed with a mosaic effect.
• Off: Does not display the privacy zones.
• Default: Gray
[Camera position display]
When operating the camera manually, you can select what information to display in the image from the
following.
• Off: Information is not displayed in the image.
• Pan-Tilt degree/Zoom ratio display: The Pan degree/Tilt degree/Zoom ratio display is displayed.
• Direction display: Direction display is displayed.
• Default: Pan-Tilt degree/Zoom ratio display
Note
• When “Pan-Tilt degree/Zoom ratio display” is selected, the Pan-Tilt degree/Zoom ratio display is
displayed in the position specified in “OSD” on the [Basic] tab. (®page 55)
• When “Direction display” is selected, the direction display is displayed in the position specified in
“OSD” on the [Basic] tab. (®page 55)
• When “Direction display” is selected, configure the direction of north in “North point setting” of “Direction
setting”. (®page 123)
[Operation mode display]
When the camera is operating automatically, the operation mode is displayed.
• On: Displays the operation mode.
• Off: Does not display the operation mode.
• Default: Off
Operation mode
Display
The camera is initializing. INITIAL
Operating Instructions 97
11 Configure the settings relating to images and audio [Image/Audio]