17
Operating procedures
Prior to operating this product, confirm that the system setup for this product, Center
Module, order post, and other devices has been completed.
Turning on the power
1 Insert the battery in this product and then rotate the microphone boom to turn
on the power.
● When the power is turned on, the voice messages “Hello”, “Headset xx” (xx: ID
number registered in the Center Module) and “Lane x” (x: Connected Lane number)
are heard from the earphone.
Wearing the product
1 Wear this product.
Place this product on your head with the ear pad side up against your ear.
The length can be adjusted on the head pad side.
Earphone
Head pad
Microphone
boom
Rotate the microphone boom to adjust it so that the microphone boom tip is positioned
near your mouth.
You can also attach a strap (commercially
available) to this product.
Note
Strap
(commercially
available)
WX-CH457P_PUQX1020ZAV1.indb 17 2021/07/02 14:31:23
To Next Page
Loading...
