Panasonic WX-CH457P - Communicating with Customers (TALK)

English
19
 Communications with customers (TALK)
Any store personnel wearing the headset can communicate bidirectionally with any
customer who is at the order post.
 You will hear a beep in this product when a vehicle arrives at the order post.
When the Talk-Lock mode is preset
1 Press the [T] button.
● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2 Press the [T] button again.
● Communication is interrupted and the conversation is ended.
When the Press-To-Talk (PTT) mode is preset
1 Hold down the [T] button.
● A beep is heard from the earphone to confirm that communication has been
established. In this state, you can talk with a customer at the order post by speaking
into the microphone of this product.
2 Release the [T] button.
● Communication is interrupted and the conversation is ended.
[T] button
 The Talk-Lock mode and the Press-To-Talk (PTT) mode can be configured in the
setting mode. For further details, refer to pages 35 and 36.
 Do not hold the microphone boom while communicating on this product. Doing so will
result in feedback, causing the order post, etc. to output abnormal sound.
Note
WX-CH457P_PUQX1020ZAV1.indb 19 2021/07/02 14:31:23