Panasonic WX-CH457P - Alert Notification; External Device Control

English
21
 Alert notification
When the Center Module is WX-CC411, WX-CC411A, WX-CC412 or WX-CC412A, store
personnel wearing the headset can send a security alert to the Center Module.
1 Press the [VOL] button while holding down the [S] button.
● A beep is heard from the earphone, indicating that the transmission is complete, and
a security alert is sent to the Center Module.
2 When the Center Module receives a security alert, it is possible to perform a
preset operation (TALK & PAGE Recording, Send E-Mail, alert message playback,
Camera Monitoring, etc.).
[VOL] button
[S] button
 External device control
When the Center Module is WX-C3010, you can control the external device control terminal
of the Center Module using this product.
1 Press the [VOL] button while holding down the [S] button.
● A short beep is heard from the earphone and the external device control terminal of
the Center Module enters the ON state.
2 Release the [S] button or the [VOL] button.
● 2 short beeps are heard from the earphone and the external device control terminal
of the Center Module enters the OFF state.
WX-CH457P_PUQX1020ZAV1.indb 21 2021/07/02 14:31:23