Panasonic WX-CH457P - Manager Mode Configuration

English
27
 Manager mode
The manager can interrupt store personnel’s TALK or PAGE at any time by monopolizing
one channel by priority.
 Only 1 unit of the headset can be set to manager mode. Complete ID Registration, to
do this setting.
Note
1 Rotate the microphone boom to turn off the power of this product.
2 Rotate the microphone boom while holding down the [S] and [T] buttons to turn
on the power of this product.
● The power indicator turns red and green alternately.
[T] button
[P] button
[S] button
Power indicator
3 Press a communication button ([T] or [P] button) while the power indicator turns
red and green alternately.
Setting manager mode for Lane A
● When the [T] button is pressed, the manager mode is set for Lane A. The lane
indicator blinks orange and “Connecting Center Module A” can be heard from the
earphone.
Setting manager mode for Lane B
● When the [P] button is pressed, the manager mode is set for Lane B. The lane
indicator blinks green and “Connecting Center Module B” can be heard from the
earphone.
WX-CH457P_PUQX1020ZAV1.indb 27 2021/07/02 14:31:24