Panasonic WX-CH457P - Unused Settings; Talk;Page Auto Off Setting; Initialization Procedure; Center Module Model Selection

English
37
 Unused (4 blinks)
 Talk/Page Auto Off setting (5 blinks)
Configure the auto off function.
This function detects the motion of this product to automatically turn communication off if
this product is left unattended during communication (Talk or Page).
Operation Setting Description
Pressing the [T]
button
ON
Ends communication if this product is not moved
for 10 minutes during communication (Talk/Page).
Pressing the [P]
button
OFF*
Communication (Talk/Page) is not ended
automatically.
* indicates the default setting.
 Initialization (6 blinks)
Initializes this product to the state at the time of shipment.
Operation Setting Description
Holding down the
[T] button
—
Executes setting initialization and restarts this
product.

When this product is initialized, the registered ID information is also deleted.
Note
 Center Module model selection (7 blinks)
Selects the Center Module to connect.
Operation Setting Description
Pressing the [T]
button
WX-C3010 Connects to WX-C3010.
Pressing the [P]
button
WX-CC411*,
WX-CC411A*,
WX-CC412*,
WX-CC412A*
Connects to WX-CC411, WX-CC411A,
WX-CC412 or WX-CC412A.
* indicates the default setting.
WX-CH457P_PUQX1020ZAV1.indb 37 2021/07/02 14:31:24