26
If ID registration fails, a beep and the voice message “Failed” are heard from the
earphone, and the power indicator blinks red. If that happens, retry from step 2.
Note
5 When the ID registration is complete, cancel “ID Registration” mode of the
Center Module.
● When this is done, “ID Registration” of this product is cancelled and the power
indicator turns green.
Communication between headsets is not possible while the Center Module is in “ID
registration” mode.
Note
Setting the unit
WX-CH457P_PUQX1020ZAV1.indb 26 2021/07/02 14:31:24
To Next Page
Loading...
