Panasonic X-Plus Series SP-DRH04 - Page 15

15
⑫ USB PORT: To connect USB Thumb drive to backup data.
⑬ HDD: The indicator blinks during recording and playback.
⑭ POWER: The indicator blinks when the AC adaptor is connected.
Direction, Selection & Escape buttons
ⓐ Press to move up the menu in Setup mode
ⓑ Press to move right or to change the values in Setup mode
ⓒ Press to move down the menu in Setup mode
ⓓ Press to move left or to change the values in Setup mode
ⓔ To select full screen or quad screen view in live/playback. Or to select desired menu item and to store the
setup value.
ⓕ To return to previous menu screen or to exit from playback.
Figure 2.1.2. Front panel (SP-DRH08 & DRH16)
Table2.1.1. Indication lamps
NO.
Name
Description
A
CH1~16
Indicating that the channel is being recorded.
B
HDD
Indicating that the system is accessing the hard disk.
C
ALARM
Indicating that when sensor(s) is/are triggered or motion is detected.
D
NETWORK
Indicating that when Network client connects through the network.
E
BACKUP
Indicating that USB or DVD-RW storage device is stored images or
video.
F
POWER
Indicating that the system is switched on.
Table 2.1.2. Front panel buttons
NO
Name
Description