Panasonic X-Plus Series SP-DRH04 - Setup - Device Mode

28
Figure 3.3.2. Schedule recording setup screen
3-4. Setup – Device Mode
Press the SETUP button and enter the password. Select DEVICE icon and press SEL button to enter the
setup menu item. Then, the device menu is displayed as picture below. Navigate through the menu items
using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control and change the value of the
menu item.
Figure 3.4.1. Device mode setup screen
Table 3.4.1. Menu items in Device Setup screen
Item
Description
ALARM OUT
Select alarm-out channel and set up the alarm duration
(5 SECONDS ~ INFINITE)
CONTROLLER & PTZ
Set the controller and PTZ camera speed, number, type and ID.