To open and close the insert tray, press the button.
To save video, insert a DVD-R media
2-2. Rear Panel
Figure 2.1.3. Rear panel (SP-DRH04)
4 connectors for video input. (NTSC/PAL)
Video output termal or Spot out terminal
4 connectors for audio input.
1 connector for audio output.
Connector for VGA monitor.
RJ-45 connector for LAN connection.
SENSOR IN
ALARM OUT
RS-485
4 connectors for sensor device connection.
1 connector for alarm device connection.
Provides simple On/Off switching by using relay. 0.5A/125V,
1A/30V
To archive still-image or video into a USB memory or
upgrade firmware with USB memory stick, connect a USB
memory to the USB terminal.
Figure 2.1.4. Rear panel (SP-DRH08)